BOLLARDS
STOPPY-B Electromechanical Bollards
Value for money and quality. These are the roots of the new STOPPY B bollards. The result of a careful market survey looking into the assembly techniques and design details that led to the production of a simple bollard that responds to customer needs without neglecting the quality requirements that have always marked BFT products. All at a competitive price. STOPPY B comes in two models: the first, STOPPY B Ø115-500, has a Ø115 mm, 500 mm high rod. It has no light crown but is fitted with a rear-reflecting strip. The second, STOPPY B Ø200-700, has a Ø200 mm, 700mm high rod, a light crown and a rearreflecting strip.
PERSEO CBD dedicated control panel: manages up to 4 bollards in parallel, programming menu on the display, integrated heating element and incorporated receiver.
Main accessories: RME 1 BT 24V metal mass detector, one channel / RME 2 230V metal mass detector, two channels/ SPIRA 2x1 magnetic coil 2x1 m
Technical Features
Description | STOPPY B 115/500 | STOPPY B 200/700 |
---|---|---|
Shaft Diameter | 115mm | 200mm |
Shaft height | 500mm | 700mm |
Raising Time | 7 sec | 9 sec |
Control Unit | PERSEO CBD | PERSEO CD |
Breaking resistance | ||
Type of Limit Switch | ||
Slowdown | ||
Lock | ||
Manual Operation | ||
Frequency of use | ||
Ambient Conditions |
Standard Kit Contents
STOPPY-MBB Electromechanical bollards for intensive use
230v AC electromechanical bollard with internal oil-bath gear motor. Stoppy-Mbb is the ideal solution for contexts of particular architectural and urban interest, with specially studied colours and a new design for the floor flange and light crown.
Designed to work in the most extreme conditions, with all metal parts treated with cataphoresis and the new EPDM seal integrated in the flange and led light crown, which with the bollard lowered, fits perfectly into the floor flange, drastically reducing the entry of waste materials into the bollard housing.
PERSEO CBD control unit with menu programming on the display, automatic routine servicing warning, simultaneous management of up to 4 bollards, integrated receiver and integrated heating element and incorporated receiver.
Main accessories: RME 1 BT 24V metal mass detector, one channel / RME 2 230V metal mass detector, two channels/ SPIRA 2x1 magnetic coil 2x1 m
Technical Features
Description | STOPPY MBB 219/500 | STOPPY MBB 219/700 |
---|---|---|
Shaft Diameter | 219mm | 219mm |
Shaft height | 500mm | 700mm |
Raising Time | 7 sec | 9 sec |
Control Unit | PERSEO CBD | PERSEO CD |
Impact resistance | ||
Breaking resistance | ||
Slowdown | ||
Lock | ||
Manual Operation | ||
Frequency of use | ||
Ambient Conditions | ||
Movement | ||
Standard Kit Contents
DAMPY B MANUAL GAS BOLLARDS
These gas-spring operated rising bollards were designed to offer road access control at competitive prices and with an extremely simple operation. They are operated using special keys now used throughout Europe in public places. They are lowered at the press of a foot and are automatically locked into place at the bottom. Given their size and similar appearance, they can be used in mixed installations to cover wide passages managed by both electric and gas operated bollards. The models are available with grey painted RAL 7015 rods, lights cap, adhesive strip H:100 mm. 220 mm diameter models are available also with lights and stainless steel stem.
Technical Features
Description | DAMPY B Ø115/500 | DAMPY B Ø219-500 | DAMPY B Ø219-700 |
---|---|---|---|
Shaft Size | Ø115 mm H: 500 mm | Ø220 mm H: 500 mm | Ø220 mm H: 700 mm |
Shaft Thickness | 4 mm | ||
Impact resistance | 5,0000J | ||
Break resistance | 30,000J | ||
Shaft Treatment | |||
Shaft Movement | |||
Surface Finish | |||
Shaft Locking |
Standard Kit Contents
RANCH B-C-D FIXED BOLLARD
• Fixed bollards used for preventing access for long periods. Bolted to the ground, their purpose is to block an access point or a road. They can integrate the use of automatic or semi-automatic bollards.
Technical Features
Description | RANCH B 219/500 | RANCH B 219/700 | RANCH C 275/600 | RANCH C 275/800 | RANCH D 275/800 |
---|---|---|---|---|---|
Shaft Height | 500 mm | 700 m | 600 mm | ||
Shaft Diameter | |||||
Shaft Thickness | 10 mm | ||||
Shaft Treatment | |||||
Breaking Resistance | 730000J |
Standard Kit Contents
PILLAR - HYDRAULIC BOLLARD
230v AC hydraulic bollard for very intensive use. Its size and technical characteristics make it particularly suitable, thanks to the special SD(security) version that keeps the shaft raised in the event of a power failure, for installations to protect sensitive places (ministries, barracks, airports, access to buildings of particular importance, etc.). The standard version, on the other hand, is suitable for public installations where the shaft must lower spontaneously, freeing the passage in the event of a power failure. Designed and built with the aim of simplifying maintenance thanks to the hydraulic pump located under the flange.
PERSEO CBD control unit with menu programming on the display, automatic routine servicing warning, simultaneous management of up to 4 bollards, integrated receiver and integrated heating element and incorporated receiver.
Main accessories: RME 1 BT 24V metal mass detector, one channel / RME 2 230V metal mass detector, two channels/ SPIRA 2x1 magnetic coil 2x1 m
Technical Features
Description | 275/600.6C L | 275/600.6C L SD 275/600.6C LI SD | 275/800.6C L | 275/800.6C L SD 275/800.6C LI SD |
---|---|---|---|---|
Voltage | 230V | 230v | 230v | 230v |
Shaft Height | 600 mm | 600 mm | 800 mm | 800 mm |
Shaft Diameter | ||||
Raising Time | 5 sec | 5 sec | 6.5 sec | 6.5 sec |
Operator Type | ||||
Control Unit | ||||
Breaking Resistance | ||||
Frequency of use | ||||
Type of Limit Switch | ||||
Impact Resistance | ||||
Manual Operation | reversible with no power | release key | reversible with no power | release key |
Ambient conditions |
Standard Kit Contents
TWIN - 24V chain barrier for access points up to 16 m
“TWIN” 24 Vdc automatic chain barrier for intensive use, suitable for delimiting accesses to residential and industrial areas and small private car parks with entry points up to 16 m. The exclusive cap with traffic lights (in TWIN LIGHT version) and buzzer facilitates entry and exit. Very durable, cataphoresis treated and painted steel structure, “TWIN” is an excellent and safe solution for protecting public and private areas, thanks to an “encoder” reverse motion system, and integrates perfectly with the urban environment.
• Available in versions with and without cap with traffic lights
Technical Features
Description | TWIN ON LIGHT | TWIN OFF LIGHT |
---|---|---|
Opening or closing | 10 Sec | 10 Sec | /tr>
Access point width | ||
Chain m | ||
Control unit | on board Model LOG-BC with integrated receiver | - |
Motor power supply | 24V | - |
Type of Limit Switch | Electronic | - |
Impact reaction | “ENCODER” reverse motion when closing | - |
Frequency of use | Intensive | - |
Ambient conditions |